We just received some lovely installed pictures from this Alpine White BMW F10 M5 from South Africa. This M5 has our DTM Carbon Fiber Diffuser installed and some other CF accessories. The diffuser is a large 2 fin design and helps add that aggressive and race inspired touch.
As for the accessories, this F10 M5 owners went with a set of Carbon Fiber Kidney Grilles + the CF Fender Grilles. Both of these pieces are made using a 1×1 carbon fiber weave fabric.
Please get in touch with RW Carbon’s carbon fiber specialists with any questions you may have. 714.328.4406.
The F10 M5 is BMWs current M5 model. It produces over 560HP from its 4.4L V8 twin turbo power plant. This high end sports sedan is no slouch in the performance department, but some may agree it could use more aggressive styling.
That is where RW Carbon comes in. We manufacturer several different carbon fiber aero kits for the F10 M5 models. The owner of this one went with a 3D Style CF Front Lip Spoiler and our Vacuum Formed Performance Style Trunk Spoiler.
Both pieces are made out of lightweight and strong 2×2 carbon fiber fabric. Each one is coated with a clear coat for glossy finish and optimal protection from the sun and other road debris.
Both the front lip and trunk spoiler are fairly simple to install. The front lip requires 3M tape and self taping screws, while the spoiler only requires 3M tape. However, the OEM spoiler will need to be removed.
If you have any questions or concerns about the carbon fiber parts used for this BMW F10 M5 please get in touch with RW Carbon. 714.328.4408
After our recent Bimmerpost forum threads about our BMW F10 M5 Center Front Lip (Front Lip Thread Click Here) and Diffuser (Diffuser Thread Click Here), these products have really taken off.
Here is another customer wanting the same setup on his BMW F10 M5. These parts work together as a perfect package for a subtle exterior upgrade. We do carry more aggressive products for the F10 M5, but sometimes builds require less to be more. This is another perfect example of a simplistic ascetic improvement.
Do you have any questions? Get in touch with a rep from RW Carbon today. Call us at 714.328.4406 or email us at firstname.lastname@example.org.
Day 8 of owning my BMW F10 M5 I Installed RW Carbon’s Center Carbon Fiber Front Lip Spoiler. It was super easy and only took about an hour.
Jack the car up, don’t forget to use a BMS BMW Jack Pad Adapter (so you won’t tear up your plastic jack pads) and Jack Stand for the center jack point. Remove 4x8mm screws from the bottom. The lip doesn’t come pre-drilled, but it does have indentation for where the holes should be (you can see them in the photo). So I drilled 4×1/4″ holes (start with the smaller bits, then work up to 1/4″). Drill at a lower speed and wear a mask to avoid breathing in resins. I just hold my breath and walk away after each hole.
Once drilling and fitting is done (test fit the screws position, enlarge the holes as needed). Wipe the bumper and lip with a micro fiber cloth soaked in a bit of rubbing alcohol. Stick 3 strips of 3M outdoor double sided tape on the center section and one strip of tape on each side of the lip. Position the tape about 3/4″ away from the front of the lip so it’s out of the view. (sorry, I forgot to take photos of the tape position).
Once tape is on, test fit one more time. I don’t remove the tape all the way from the 5 strips, I peeled it half way and have it hanging out in front for access. Go ahead and install 4 screws half way while trying to keep tape in front from sticking. Once you’re satisfied, peel the tape (red part) all the way and press. Tighten the screws and Voila, you’re done. This shouldn’t take more than 45min.
I’m super happy with the carbon fiber quality and fitment on this lip. To check out the full review on Bimmerpost Click Here.
If you have any further questions about this center front lip spoiler you can visit the product listing by clicking here or get in contact with a carbon fiber specialist at 714.328.4406 or email us at email@example.com. For more parts for your BMW F10 M5 visit our online store at http://www.rwcarbon.com.